Your Proxy IP is: 54.167.253.186, 54.167.253.186

Enable SSH access on a Cisco router

The following are the steps to setup SSH access on a Cisco router:

1: Configure Domain name

2: Generate Crypto keys

3: enable VTY ports for SSH

The commands for the above steps are:

1: ip domain-name <name>

example: ip domain ezref.info

2: crypto key generate rsa

This generate a crypto keys using the RSA algorithm, Cisco recommends a 1024 BITS keys

3: transport input ssh 

You need to type this command under line configuration mode. SSH in the above command can be replaced with telnet or all to allow access through both the protocols.

Keep in mind that SSH requires a username and password, thus you need to have a local database of username and password stored locally.